fbpx

Saramonic CaMixer On-Camera Audio Adapter and Mixer with Dual Mics and XLR

Saramonic CaMixer On-Camera Audio Adapter and Mixer with Dual Mics and XLR

Saramonic CaMixer On-Camera Audio Adapter and Mixer with Dual Mics and XLR

$176 (incl. GST)

In stock

$176 (incl. GST)

Saramonic CaMixer On-Camera Audio Adapter and Mixer with Dual Microphones and XLR with +48V Phantom Power Preamp, Headphone Output and Shoe Mount for DSLR, Mirrorless and Video Cameras

Availability: In stock SKU: SARAMONIC-CAMIXER Category:
  • Description
  • Additional information

Description

  • A complete solution for improving sound on DSLR, mirrorless, and camcorders
  • Includes a mixer, mics, output and input cables, and camera mount
  • Provides +48 volts of phantom power to professional XLR mics
  • Monitor audio during recording and playback with built-in headphone jack
  • Durable metal construction with shoe mount for microphones, lights or other equipment

The built-in microphones on DSLR, mirrorless, cinema and video cameras sound terrible, but if you use the Saramonic CaMixer with your camera, your audio will be elevated to broadcast quality. The CaMixer supplies you with two excellent-sounding condenser microphones, and you can also use the XLR microphone of your choice. A built-in headphone jack lets you listen to everything you shoot, and the entire package is compact and ultraportable.

The lightweight CaMixer runs on a single 9-volt battery and comes with two low-profile condenser microphones that plug directly into it. These mics can swivel up and down and rotate to point at people and other sound sources. A mini-XLR input on the side makes it possible to connect professional microphones, and a switch applies +48 volts of phantom power for using shotgun condensers and other kinds of microphones.

A large, stepped gain knob lets you easily dial-in perfect levels, and the backlit display lets you see your audio and battery meters. You can switch between recording and playback modes to listen to your videos through the CaMixer’s headphone jack. A shoe mount is provided at the top to attach microphones, lights or other equipment, and a tripod thread at the base enables you to mount to a camera.

Included items:

1 x CaMixer audio interface

2 x Swiveling condenser microphones

2 x Output cables (1 for cameras with headphone jacks, 1 for cameras without headphone jacks)

1 x Metal shoe mount

1 x Short mini-XLR to regular XLR cable

1 x Printed manual

1 x Warranty card 

Specifications:

Frequency Response: 20 Hz to 20 Khz, +/-0.5 dB

Signal to Noise Ratio: 82 dB @ 1 kHz, -30 dBu input

Distortion: Less than 0.03% @ 1 kHz, -30 dBu input

Input 1 Gain: 15 dB

Input 2 and Mini XLR Jack Gain: 15 dB

Microphone Inputs 1 & 2 Power: +5V Microphone Power

XLR Mini Input Power: +48V Phantom Power (On/Off)

VU Meter: -18 dB to +3 dB in 3 dB increments

Power Requirements: 9V alkaline or lithium battery

Dimensions: 95 x 35 x 65 mm

Weight: 156g

Additional information

Weight 0.3500 kg
Dimensions 14.0000 × 7.0000 × 19.0000 cm
B2B Product

true